Bananakit

Explore the art of cloning

BANANAKIT Tutorial

Discover the simple steps to create your own personalized banana clone with our DIY Banana Clone Kit. Perfect for beginners and enthusiasts.

Your guide to creating a perfect clone

We’re excited to help you create a unique clone with our DIY molding kit. Whether you’re a first-timer or an experienced user, our step-by-step guide is designed to make the process simple, fun, and safe.

Use Warm Water

For the best results, use warm water — not too hot and not too cold. Cold water can cause your “banana” to shrink, affecting the accuracy of the mold. Warm water helps keep everything relaxed and ensures a perfect fit.

Team Up for Help and Fun

Making a mold is a unique experience, and it’s even better when you share it with someone else. It’s hard to do everything alone — a partner can help you relax and enjoy the process.

Choose a Suitable Location

Although our kit is designed with a no-spill system to minimize mess, it’s best to conduct the cloning process in a location where any accidental spillage can be easily cleaned.

Step-by-Step Video Guide

Watch our detailed video below to see how you can create your own mold using the Bananakit. This easy-to-follow tutorial covers every step of the process.

Written Instructions

  1. STEP 1 — Take the sheets of latex and make a cut, in the center, about 3/4 cm (1.18/1.57 in) long on one sheet and 2 cm (0.79 in) on the other.
  2. STEP 2 — Close one end of the tube using the latex sheet with the larger cut and the two elastic bands.
  3. STEP 3 — Fill a container with a capacity of about 2 liters (67 fl oz) with 800 ml (27.05 fl oz) of lukewarm tap water.
  4. STEP 4 — Open the tube with the alginate powder, remove the vibrator, and pour the entire contents into the container with the water. Mix well for about 30 seconds.
  5. STEP 5 — Insert your erect banana into the tube through the opening in the latex, making sure that no part of the banana touches the walls of the tube.
  6. STEP 6 — Pour all the alginate mixture from the top of the tube until the banana is completely covered. Keep the banana steady while the mixture sets.
  7. STEP 7 — Once the alginate gel has hardened, gently remove your banana from the tube.
  8. STEP 8 — Insert the tube that contained the alginate powder into the one with the freshly made mold, so as to prevent the mold from deforming.
  9. STEP 9 — Pour the contents of the two silicone jars into a bowl and mix for about 1 minute until you obtain a smooth mixture.
  10. STEP 10 — Pour the silicone mixture very slowly into the mold to avoid the formation of air bubbles. Do not fill the mold completely.
  11. STEP 11 — Close the tube with the latex sheet and the rubber band. Then insert the vibrator through the cut in the latex.
  12. STEP 12 — Wait half an hour before removing your replica from the mold. You can wash it with soap and water to keep it clean.

📦 Discreet shipping — plain box, no brand name

🇮🇹 Made in Italy — dental-grade standards

🛡️ Medical-grade silicone — body-safe